Floor Systems
KFS164000 - QAS
KFS16500 - Long Wheel Base Package
KY420002 - Pivot Riser Ramp Set - Quik Anchor (4)
- Position a vehicle in seconds with drive-on/drive-off capability.
- Portable runways and anchor system are ideal for multi-bay use.
- The front and rear removable runways give you easy access to the suspension area.
- Plenty of elbow room with a minimum 20" clearance from the floor.
- Optional center runways, Quik-Anchor can easily handle long wheel base vehicles.
- Quik-Anchor works with most floor pulling systems.
| Specifications | |
|---|---|
| Floor to Top of Anchor Stand: | 10.5" |
| Floor to Top of Pinchweld Clamps (Min / Max): | 20" / 25" |
| Overall Length: | 17’ |
| Runway Length: | 12’ 2" |
| Width Inside to Inside Anchor Stands: | 36" |
| Width Outside to Outside Anchor Stands: | 84" |
| Width Inside Edges of Runways: | 16" |
| Width Adjustment - Each Runway: | 7" |
| Clearance Between Floor and Vehicle: | 20" |
| Weight: | 1,267 lbs. |
Low Profile Chainless Anchoring System
- Economical anchoring system permits multi-bay use and turns almost any space into a start-to-finish production area.
- Low-Profile Chainless Anchoring System is designed to provide a comfortable working height 13" both under and around the vehicle. There are four adjustable pinchweld clamps which provide positive vehicle anchoring.
BRA70090 - Low Profile Chainless Anchoring
BRA70050 - Roller Plate with Chocks
| Specifications | |
|---|---|
| Floor to Top of Anchor Stand: | 9.5" |
| Floor to Top of Pinchweld Clamps (Min: | 14" |
| Clearance Between Floor and Vehicle: | 13" |
| Working Height: | 13" |
Power Post
- Floor pull system utilizes ty-downs which are countersunk in the floor - There when you need them, out of the way when you don’t.
- Power Post’s low cost makes it ideal for small shops; it’s portable, space-saving design makes it perfect for larger shops looking to squeeze in extra production space.
BRA70070 - Power Post - Includes: anchor chain, pulling chain, pump and ram
KPK61800 - Power Post Extension
KPK64500 - Power Lift Bar
| Specifications | |
|---|---|
| Height: | 4’ 8" |
| Extension Length: | 31" |
| Height with 1 Extension: | 7’ .5" |
| Maximum Extensions: | 2 |
| Weight: | 163lbs. |
| Pulling Capacity: | 5/10/20 ton |
| Hydraulics: | 10 ton ram with 6" stroke |
Blackhawk is a trademark of Snap-on Incorporated. Snap-on Incorporated is the owner of the trademark SNAP-ON, registered in the United States and other countries, and also claims rights associated with its unregistered trademarks. See Legal Notices for further information. ©2008 Snap-on Incorporated; All rights reserved. By accessing and using this web site, you agree that you have read and are bound by the Terms & Conditions of Use, including the arbitration provisions.