UltraCUT 40E

Inverter High Frequency 220V (50/60Hz) with variable output control. Maximum 40A output at 60% duty cycle.

 

Click on one of the section titles to learn more about the UltraCUT 40E.

---

Features

• Cuts stainless steel, copper, iron and aluminium up to 1/2 inch (13mm) thick. Severe cut 5/8 inch thick (16mm)
• Metal plates with different thickness can be curve-cut into any shape
• “Easy touch” smooth start
• Air regulator with water separator for longer tip life included
• Fan assisted air-cooling with temperature overload protection
• Comes with “Back Up Pack” of tips and nozzles
• Compact cabinet 15x 6x 12in (371x 155x 295mm)
• Lightweight (only 18lbs, 8kg)
• Fully compliant with EMC directive 73/23/EEC, 89/336/EEC and European Standard EN/IEC60974-1

---

Plasma Cutting Process

Plasma cutting is a process that is used to cut steel and other metals of different thicknesses (or sometimes other materials) using a plasma torch. In this process, compressed air is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of the gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.

The HF Contact type uses a high-frequency, high-voltage spark to ionise the air through the torch head and initiate an arc. These require the torch to be in contact with the job material when starting.

Plasma is an effective means of cutting thin and thick materials alike. Since plasma cutters produce a very hot and very localized “cone” to cut with, they are extremely useful for cutting sheet metal in curved or angled shapes.

---

	UltraCUT 40E
Input Voltage	220V AC ± 10%
Input Frequency	50Hz / 60Hz
Input Capacitance	6 KVA
No-load Voltage	230V
Current Range	20-40A
Output Voltage	96V
Rated Duty Cycle	60%
Efficiency	85
Power Factor	0.93
Insulation Class	B
Protection Class	IP23
Arc Starting	Contact Arc Starting (Pilot Arc)
Air Flow	0.17 m3/min
Max Cutting Thickness	13mm
Weight	8kg (18lbs)
Size (Lx Wx H)	371x 155x 295x (15x 6x 12in)